EMI's transformer oil services combines a professional, quality control oriented staff of personnel with a state of the art facility to provide our clients with a peace of mind concerning the handling of used transformer oil. Whether the oil is less than 2 ppm PCB or 2 ppm to 49 ppm PCB, our facility and trained personnel will provide your company with the highest level of confidence that your environmental liability trail ends by utilizing EMI for transformer oil services.

All transformer oil brought into our facility is kept segregated by each transport load. Appropriate analytical reflecting PCB content, either provided by your firm or our independent certified laboratory will enable our personnel to correctly identify which segment of our facility will receive the oil. If PCB content is less than 2 ppm PCB, the oil is run through our vacuum dehydrator and then filtered through our exclusive particulate filtration system. This oil is then stored in one of our 50,000 gallon finished oil tanks for shipment.

If the oil reflects PCB content of 2 ppm to 49 ppm, the oil is then deposited into our PCB dechlorination facility. This segment of our facility consists of a fully Federal EPA and Kansas Department of Health & Environment permitted/approved equipment and technology for the effective dechlorination of PCB in mineral oil using a Sodium metal reaction with PCB. This segment of our facility is totally separated from the rest of our operations and is contained within a totally enclosed concrete dike containment building. All of the equipment and technology is state of the art and processes a finished product which effectively ends any liability trail associated with PCB's.

[ home ] [ about us ] [ transformer oil services ] [ transportation services ] [ facility photos ]